Linux command
foo2hbpl2 命令
文本
涉及管道、覆盖或删除，执行前请先确认路径和参数。
常用示例
Convert PBM to HBPL2
foo2hbpl2 [options] < [input.pbm] > [output.hbpl]
Set resolution
foo2hbpl2 -r [1200x600] < [input.pbm] > [output.hbpl]
Set paper size to letter
foo2hbpl2 -p 4 < [input.pbm] > [output.hbpl]
Print multiple copies
foo2hbpl2 -n [3] < [input.pbm] > [output.hbpl]
Enable duplex long-edge binding
foo2hbpl2 -d 2 < [input.pbm] > [output.hbpl]
Force color mode
foo2hbpl2 -c < [input.pbm] > [output.hbpl]
说明
foo2hbpl2 converts Ghostscript pbmraw, bitcmyk, or pksmraw output formats to monochrome or color HBPL version 2 streams. It supports printers including the Dell 1355, Dell C1765, Epson AcuLaser M1400, Fuji Xerox DocuPrint CM205/CM215/M215/P205, Xerox Phaser 3010/3040, and Xerox WorkCentre 3045/6015. It is part of the foo2zjs printer driver collection and works as a CUPS filter backend to enable printing on otherwise unsupported GDI printers.
参数
- -c
- Force color mode if autodetect does not work.
- -d _duplex_
- Duplex code: 1=off (default), 2=long edge, 3=short edge.
- -g _xpix_x_ypix_
- Page dimensions in pixels 10200x6600.
- -m _media_
- Media code: 1=plain (default), 2=bond, 3=lwcard, 4=lwgcard, 5=labels, 6=envelope, 7=recycled.
- -n _copies_
- Number of copies 1.
- -p _paper_
- Paper code: 1=A4, 2=B5jis, 3=A5, 4=letter, 5=executive, 6=folio, 7=legal, 9=env#10, 10=envMonarch, 11=envC5, 12=envDL.
- -r _xres_x_yres_
- Device resolution in pixels/inch 1200x600.
- -s _source_
- Input slot code: 1=upper, 2=lower, 4=manual, 7=auto (default).
- -t
- Draft mode. Every other pixel is white.
- -J _filename_
- Filename string to send to the printer.
- -U _username_
- Username string to send to the printer.
- -u _xoff_x_yoff_
- Upper-left offset of printable region in pixels 0x0.
- -l _xoff_x_yoff_
- Lower-right offset of printable region in pixels 0x0.
- -L _mask_
- Logical clipping: 0=disabled, 1=Y only, 2=X only, 3=both (default).
- -A
- AllIsBlack: convert C=1,M=1,Y=1 to K=1 (bitcmyk input).
- -B
- BlackClears: K=1 forces C,M,Y to 0 (bitcmyk input).
- -D _level_
- Debug verbosity level 0.
FAQ
What is the foo2hbpl2 command used for?
foo2hbpl2 converts Ghostscript pbmraw, bitcmyk, or pksmraw output formats to monochrome or color HBPL version 2 streams. It supports printers including the Dell 1355, Dell C1765, Epson AcuLaser M1400, Fuji Xerox DocuPrint CM205/CM215/M215/P205, Xerox Phaser 3010/3040, and Xerox WorkCentre 3045/6015. It is part of the foo2zjs printer driver collection and works as a CUPS filter backend to enable printing on otherwise unsupported GDI printers.
How do I run a basic foo2hbpl2 example?
Run `foo2hbpl2 [options] < [input.pbm] > [output.hbpl]` in a terminal, then adjust file names, paths, flags, or remote targets for your system.
What does -c do in foo2hbpl2?
Force color mode if autodetect does not work.